John Deere 5D Series Tractors have higher engine torque values by 8-10 percent in comparison to previous 5D Series.
High engine torque values improve engine lugging ability to momentarily sudden loads. It also improves overall tractor lugging ability or sustainability of the tractor for sudden heavy loads due to a change in soil properties.
Additional benefits for the operator:
No frequent gear change is required
Ability of tractor to run at low possible engine rpm (erpm) with higher gear selection
Improved operator comfort as less intervention is required to operate position control (PC) and draft control (DC) levers
A specially designed piston spray jet system in the engine provides an oil spray below the piston. This unique design system provides continuous oil spray on the piston and helps dissipate excess heat, optimizing engine operating temperature and improving engine efficiency. The optimum engine operating temperature also enhances the life of critical engine parts and reduces maintenance costs.
Provides additional lubrication to critical components of engine
When a vehicle exceeds a normal operating temperature, it begins to damage itself in many ways, including quick deterioration of the engine oil. This deterioration of engine oil lowers the engine performance and reduces the life of engine. This can lead to more consumption of oil and require frequent filling. This causes an increased need for checking engine oil level and an increase in the cost of operation.
An oil cooler system maintains the quality of oil for longer periods by lowering the working temperature of the oil. The lubrication oil passes through the oil cooler before being supplied to the engine components, which provides additional engine oil cooling for severe operating conditions.
Gives higher engine efficiency in delivering output
Increases life of engine and provides higher durability
The John Deere 5D Series Tractor has inboard wet-disc brakes after planetary reduction. A higher brake disc contact area of 545 sq cm (84.5 sq in.) gives better braking efficiency and higher durability with effective heat dissipation due to the oil-immersed brake disc.
The brake pedals have a provision for a lock-to-operate braking system in transport or individually in field applications to facilitate a shorter turning radius.
Effectively dissipate the heat generated during braking
With high-end features like dual clutch (i.e., separate traction) and power take-off (PTO) clutch, the operator has continuous application of the PTO, enhancing tillage quality without leaving untilled soil.
Nonstop/independent PTO operation
Better traction/transmission clutch life
Lower service cost
NOTE: 5036D is available only with a single clutch.
John Deere 5D Series Tractors have MQRL which gives feasibility of lifting implements to the intended position without disturbing the position control (PC) and draft control (DC) levers at a headland turn.
An additional lever is provided to facilitate lifting and lowering of the implement at the headland or whenever needed without operating/disturbing the PC and DC levers.
Benefits of MQRL
Provides a superior operator experience through better technology and reliability
Enhances productivity by reducing turning time
Enhances operator comfort by avoiding frequent PC and DC operation
Inboard planetary final drives distribute rear axle loads over three points for reduced stress on individual gears and shafts. Operators can expect longer life with less service, which means maintenance time is replaced with profitable production time. The inboard design also permits a wide range of wheel tread adjustments so operators can accomplish more with just one tractor by having the ability to custom set tire treads to meet the specific demands of a variety of tasks.
Category- II Automatic depth and draft control (ADDC)
Steering
Type
Power
Power Take off
Type
Independent, 6 Splines
Standard
540 @ 2100 ERPM
Economy
540 @ 1600 ERPM
Wheels and Tyres
Front
6.0 x 16 (0.15 x 0.41 m), 8 PR
Rear
13.6 x 28 (0.34 x 0.71 m), 12 PR 14.9 x 28 (0.38 x 0.71 m), 12 PR (Optional)
Fuel Tank
Capacity
60 L
Electrical System
Electrical System
88 Ah, 12 V Battery, 40 Amp. Alternator, 12 V, 2.5 kW Starter motor
Dimensions and Weight
Total weight
1810 kg
Wheel base
1970 mm
Overall length
3410 mm
Overall width
1810 mm
Ground clearance
0415 mm
Turning radius with Brakes
2900 mm
Accessories
Accessories
Ballast Weights Canopy Canopy holder Draw bar Tow hook Wagon hitch
Factory Fitted Options
Factory Fitted Options
JDLink (Alerts, Monitoring and Tracking System) Dual PTO Reverse PTO Roll over protection structure (ROPS) with deluxe seat and seat belt Adjustable front axle Mechanical quick raise and lower (MQRL)
2WD:
Specs
2WD
Engine
Type
John Deere 3029D, 45 HP (33.5 kW), 2100 RPM, 3 Cylinders, Coolant cooled with overflow reservoir, Naturally aspirated
Category- II Automatic depth and draft control (ADDC)
Steering
Type
Power
Power Take off
Type
Independent, 6 Splines
Standard
540 @ 2100 ERPM
Economy
540 @ 1600 ERPM
Wheels and Tyres
Front
6.0 x 16 (0.15 x 0.41 m), 8 PR
Rear
13.6 x 28 (0.34 x 0.71 m), 12 PR 14.9 x 28 (0.38 x 0.71 m), 12 PR(Optional)
Fuel Tank
Capacity
60 L
Electrical System
Electrical System
88 Ah, 12 V Battery, 40 Amp. Alternator, 12 V, 2.5 kW Starter motor
Dimensions and Weight
Total weight
1810 kg
Wheel base
1970mm
Overall length
3410 mm
Overall width
1810 mm
Ground clearance
0415 mm
Turning radius with Brakes
2900 mm
Accessories
Accessories
Ballast Weights Canopy Canopy holder Draw bar Tow hook Wagon hitch
Factory Fitted Options
Factory Fitted Options
JDLink (Alerts, Monitoring and Tracking System) Dual PTO Reverse PTO Roll over protection structure (ROPS) with deluxe seat and seat belt Adjustable front axle Mechanical quick raise and lower (MQRL)
4WD:
Specs
4WD:
Engine
Type
John Deere 3029D, 45 HP (33.5 kW), 2100 RPM, 3 Cylinders, Coolant cooled with overflow reservoir, Naturally aspirated
Category- II Automatic depth and draft control (ADDC)
Steering
Type
Power
Power Take off
Type
Independent, 6 Splines
Standard
540 @ 2100 ERPM
Economy
540 @ 1600 ERPM
Wheels and Tyres
Front
8.0 x 18 (0.20 x 0.46 m), 8 PR
Rear
13.6 x 28 (0.34 x 0.71 m), 12 PR (Standard) 14.9 x 28 (0.38 x 0.71 m), 12 PR (Optional)
Fuel Tank
Capacity
60 L
Electrical System
Electrical System
88 Ah, 12 V Battery, 40 Amp. Alternator, 12 V, 2.5 kW Starter motor
Dimensions and Weight
Total weight
1810 kg
Wheel base
1970 mm
Overall length
3410 mm
Overall width
1810 mm
Ground clearance
0415 mm
Turning radius with Brakes
2900 mm
Accessories
Accessories
Ballast Weights Canopy Canopy holder Draw bar Tow hook Wagon hitch
Factory Fitted Options
Factory Fitted Options
JDLink (Alerts, Monitoring and Tracking System) Dual PTO Reverse PTO Roll over protection structure (ROPS) with deluxe seat and seat belt Adjustable front axle Mechanical quick raise and lower (MQRL)
Puddling Special 4WD:
Specs
Puddling Special 4WD
Engine
Type
John Deere 3029D, 46 HP (34.1 kW), 2100 RPM, 3 Cylinders, Coolant cooled with overflow reservoir, Naturally aspirated
Category- II Automatic depth and draft control (ADDC)
Steering
Type
Power
Power Take off
Type
Independent, 6 Splines
Standard
540 @ 2100 ERPM
Economy
540 @ 1600 ERPM
Wheels and Tyres
Front
8.0 x 18 (0.20 x 0.46 m), 8 PR
Rear
13.6 x 28 (0.34 x 0.71 m), 12 PR (Standard) 14.9 x 28 (0.38 x 0.71 m), 12 PR (Optional)
Fuel Tank
Capacity
60 L
Electrical System
Electrical System
88 Ah, 12 V Battery, 40 Amp. Alternator, 12 V, 2.5 kW Starter motor
Dimensions and Weight
Total weight
2100 kg
Wheel base
1950 mm
Overall length
3370 mm
Overall width
1810 mm
Ground clearance
0360 mm
Turning radius with Brakes
2900 mm
Accessories
Accessories
Ballast Weights Canopy Canopy holder Draw bar Tow hook Wagon hitch
Factory Fitted Options
Factory Fitted Options
JDLink (Alerts, Monitoring and Tracking System) Reverse PTO Roll over protection structure (ROPS) with deluxe seat and seat belt Adjustable front axle Mechanical quick raise and lower (MQRL)
The John Deere 5045D PowerPro™ is a 46 HP tractor designed to meet the diverse needs of modern agriculture. Its 3-cylinder, 2900 CC engine operates at 2100 RPM, delivering high torque for efficient performance across various farming applications. The dry-type dual-element air filter ensures superior engine protection, enhancing durability and reducing maintenance needs....
Equipped with a collar shift transmission offering 8 forward and 4 reverse gears, the 5045D provides a wide range of speeds from 2.83 to 30.92 km/h, allowing operators to select the optimal speed for tasks such as ploughing, tilling or transporting goods. The side shift gear levers are ergonomically positioned to enhance operator comfort and facilitate ease of operation.
The tractor's high lifting capacity of 1600 kgf enables it to handle a wide range of implements, ensuring productivity in various field conditions. The power steering system reduces operator fatigue during long working hours, contributing to increased efficiency. Also, the oil-immersed disc provides high braking efficiency and extends the brake system’s life.
With a 60-litre fuel tank, this tractor is well-suited for extended operations without frequent refuelling. The John Deere 5045D PowerPro™ tractor is a dependable option for farmers looking for a combination of power and convenience.
Standard Features -
Top shaft lubrication in gear box, Piston spray cooling jet & Rear oil axle with metal face seal are standard features in all 5D Models making these a versatile, durable & low maintenance range of tractors.
A PowerPro tractor is a power packed tractor, it is enabled with a high back up torque and creates accelerated productivity towards all agricultural application
Equipment models, features, options, attachments and prices may vary in different locations. Please contact your local John Deere dealer for details. John Deere has the sole discretion to review and adjust the specifications, model features and prices of John Deere parts. Before operating the vehicle, you are required to carefully read and strictly follow the safety instructions provided in any product/operator/service manual for the vehicle.
Actual vehicle top speed may vary based on belt wear, tire selection, vehicle weight, fuel condition, terrain and other environmental factors. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Variation may exist between the actual operation data and defaulted data for the horsepower and torque. Please refer to the original engine manufacturer’s website for detailed information. Optional accessories and attachments are not included in the standard warranty claim for reimbursement. The product (including its components) and accessories may not be available in all regions.